Thinner and tool cleaner for single component primers, topcoats and varnishes.
HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry spray and poor film formation. HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted.
As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. 08111 / 08231 Brush thinner where THINNER 08081 is specified as spray thinner only. Thinner for one-pack varnishes. HEMPEL'S PRIMER UNDERCOAT 13201 HEMPEL'S UNDERWATER PRIMER 26030 HEMPEL'S MULTICOAT 51120 HEMPEL'S BILGE & LOCKER PAINT 5112B HEMPEL BRILLIANT GLOSS 53200 Part of European Yacht assortment. Local availability subject to confirmation. HEMPEL'S THINNER 08111Product Data PHYSICAL CONSTANTS: The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. Shade nos/Colours: VOC content: Specific gravity: Flash point: - 00000/ Colourless. 39 °C [102.2 °F] 0.8 kg/litre [6.5 lbs/US gallon] 781 g/l [6.5 lbs/US gallon] APPLICATION DETAILS: Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. REMARKS: HEMPEL'S THINNER 08111 The information given in the Product Data Sheet is intended for commercial use. Note: Cleaning of tools: Tools can usually be cleaned with the THINNER prescribed for the product.
**SHIPPING PRICE IS FOR NORTH ISLAND SHIPPING ONLY, INCLUDING AUCKLAND** Auckland we recommend collection if possible.
SOUTH ISLAND SHIPPING: Please contact the Smart Crew for a shipping quote to your address.
SORRY, THIS ITEM CANNOT BE ORDERED ONLINE TO THE SOUTH ISLAND. The shipping price is for North Island delivery only.
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
