Designed to remove LIGHT to MEDIUM oxidation.
Also to clean, polish and protect fiberglass/gelcoat. Unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
Features:
Restores shine
Restores color
Aggressive Formulation
One step application
Leaves a high gloss
Protects finish
Retards U.V. damage
Typical Physical Properties:
Color- Beige
Consistency- Liquid
Odor- Mild Solvent Odor
Directions for Use:
Surface Preparation:
Clean surface with 3MTM Marine Multi-Purpose Boat Soap (light duty),
other remaining contaminants can be removed with 3MTM General
Purpose Adhesive Cleaner, P. N. 08984. When using solvents, use in a well ventilated area. Extinguish all sources of ignition in the work area and observe proper precautionary measures for handling such materials. Refer to product label and MSDS for further precautions.
Selection:
3MTM Marine Fiberglass Cleaner and Wax is recommended for medium oxidation. Rub the gelcoat with your hand or a dry rag. If a chalky residue transfers to the rag or your hand, the gelcoat is considered heavily oxidized and 3MTM Marine Restorer and Wax is recommended. If the gelcoat looks oxidized but no residue is transferred, the gelcoat is considered to have light to medium oxidation, 3MTM Marine Cleaner and Wax is recommended.
Application:
Shake well. For best results use machine application.
Hand Application:
Scotch-BriteTM or other high quality cloth
1. High Performance Cloths are recommended for application.
2. Apply material to small area using a soft, clean cloth.
3. Rub aggressively using short strokes.
4. Keep turning the cloth as more material is applied.
5. Buff to a high gloss using a clean, soft cloth. Do not stop and allow
to haze.
Machine Application:
1. Apply with an air or electric buffer (1500-2500 RPM) equipped with
a 3M SuperbuffTM, P.N. 05700, 3M SuperbuffTM 2 plus 2, P.N.
05701 or 3M HookitTM SBS Compounding Pad, P.N. 05711.
2. Apply a sufficient amount of material to boat surface to work a 2' x
2' area.
3. Before starting machine, spread the material with buffing pad. This
will reduce slinging of material and simplify clean up.
4. Buff using light to medium pressure in a consistent uniform pattern.
5. Reduce pressure when material begins to dry.
6. Repeat if needed.
Maximum 3000 RPM for 3M TM Superbuff TM or 3M TM Hook-it TM buffing pads.
Note: This product was designed and tested for use on production gelcoat surfaces. Tested for suitability on paint and other surfaces.
Cleanup:
High Performance Cloths are recommended to remove residue from surface.
3MTM Marine Liquid Wax.
Applications:
3M Marine Cleaner and Wax will restore luster and gloss to gelcoat due to:
Oxidation
Staining from:
Rust
Water spots
Black streaks
Smart VIP Price Promise
Our prices are very Smart at Smart Marine! Our Smart VIP Membership and committment to great deals makes sure of that, but if you find a lower price, tell us- we will match it!*
Price Promise Terms & Conditions
- Excludes limited time specials, clearances, non-stocked products, overseas websites, price comparison websites and eBay/TradeMe.
- Applies to identical products, in stock in NZ with pricing valid at time of price match request and purchase, with evidence supplied.
- Excluded Products: clearance, run-out, distress, damaged/soiled, parallel imported, non-stocks, trade quotes, commercial quantities, credit account holders, insurance claims, services, typos, overseas websites, price comparison websites, auction websites.
- Free product, offers, sales and promotions cannot be redeemed with price matches.
- The price match applies to the total cost to buy including shipping, taxes and fees.
- Approved Price Promise Matches and purchases can only be redeemed with our store crew. Please contact your closest store with stock.
- Short term finance may not be available with some price matched purchases. Please enquire.
