A water chamber inside a tough envelope.
Tested and patented : The Plastimo water tanks consist of a welded non-porous tasteless PVC water chamber (inner bladder) inside a tough nylon envelope, for complete watertightness and resistance to tearing and abrasion. The inner bladder does not effect the water taste . The inner has tough welded seams and is slightly over-sized so it cannot put too much pressure on the seems being over inflated. These form fitting lightweight tanks can be installed almost anywhere. Easy maintenance, as the inner chamber can be removed for routine cleaning. Loops on corners for holding in place.
Suitable for boats & motorhomes in spaces without sharp objects.
Water tanks are supplied complete, ready to install, with Ø 38 mm inlet fitting and Ø 12 mm outlet valves.
Ø 38 mm inlet valve is situated on upper side of tank ;
Ø 12 mm outlet valve is situated on underneath side of tank.
(except on triangular model : inlet and outlet are both on upper side of tank).
Outlet valve, situated on underneath side of tank.
- DIMENSIONS when empty: L1750 x W 700 x H 250mm
- Height of tanks, when filled to capacity : 25 cm.
- More sizes in the range are available as pictured below-see seperate listings. (One only in this listing)
Please note ** AS WITH ALL WATER TANKS USED FOR DRINKING WATER, THEY SHOULD BE CLEANED 1ST TIME AND THEN REGULARLY AFTER THAT, (DEPENDANT ON USAGE), WITH SODIUM BICARBONATE (BAKING SODA). THIS IS BEST DONE BY ADDING TO TANK WATER AND LEFT FLUSHING ABOUT FOR AT LEAST A DAY. FLUSH TANK WITH CLEAN WATER AFTERWARDS BY OVERFILLING TANK.