Grand Pacific Extra Heavy Duty Inflatable Marina Fender - 90Cm X 15Cm X 24Cm

{{ getFromPrefix }} SMART VIP CARD PRICE

Mix 'N' Match Deal: Buy {{ selectedOption.mixnMatch.quantity }} + and save {{ selectedOption.mixnMatch.price }}% {{ selectedOption.mixnMatch.quantity }} x for {{ selectedOption.mixnMatch.description }}

Serves: {{selectedOption.serves}} ( per serve)

was save {{ selectedOption.saleSavingsPercent }}%


{{packitem.quantity}} x {{}} {{packitem.options[0].name}}

- +

Stock Notification

Item excluded from freight specials


Store Availablity

{{}} Low Stock In Stock Out of Stock
Select a variation to see branch availability


Has a sturdy threaded plug in a single valve for inflation.

Top of fender protrudes 50mm above the marina on a rounded angle specifically designed to protect your stern or bow but can also be used as standard side fender.

6mm Thick heavy duty UV stabilised PVC. (50% thicker than competitors)

Nitrogen filled when new but std compressed air can be used also.

Designed to be fixed to a flat vertical surface with the top attachments points to be mounted horizontally via a lip. 

Proven to be the best alternative versus rubbber tyre type fendering not only inside marinas but exposed getty situations where added forces of wave action and boats over 20 tons need to be compensated for. 

Actual Measured Dimensions:

5 x 7mm fixing holes at the top and again at the bottom of the marina fender. Fastenings not included.

Approx dimensions for underside mounting area: 200mm high x 5cm deep on top mounting lip, x 885mm long.

Approx overall dimensions at widest points: 240mm high, 885mm long, 190mm deep, (including the top mounting lip.)

Approx dimensions of fender excluding the top mounting lip: 240mm high, 885mm long, 145mm deep.

Approx 190mm between horizontal mounting holes, centre to centre.

Approx depth of fender excluding the mounting lip:  145mm

Subscribe for Special Offers

Sign up successful!