Multiflex Steering Cable - 3.96M (13Ft)

{{ getFromPrefix }} SMART VIP CARD PRICE

Mix 'N' Match Deal: Buy {{ selectedOption.mixnMatch.quantity }} + and save {{ selectedOption.mixnMatch.price }}% {{ selectedOption.mixnMatch.quantity }} x for {{ selectedOption.mixnMatch.description }}

Serves: {{selectedOption.serves}} ( per serve)

save {{ selectedOption.saleSavingsPercent }}%

{{product.options[0].name}}

{{packitem.quantity}} x {{packitem.item.name}} {{packitem.options[0].name}}

- +

Stock Notification

Standard NZ $9.99 per order shipping deal, qualifies for FREE shipping for order totals over NZ $200.00

Store Availablity

{{b.name}} Low Stock In Stock Out of Stock
Select a variation to see branch availability
SKU #

Easy Connect Steering cable, suits most brands of rotary helm steering, cable only, output ends of Stainless Steel.

Easy connection which does not require tools. Output ends made of stainless steel to minimise corrosion. 7/8" tilt tube mount nut. Suits most Teleflex / Morse rotary steering systems from 1968 to present.

Specifications :
Maximum Travel  : 9inch (230 mm)
Minimum bend radius  : 8 inch (200mm)
Maximum working load at Tiller end  : 5000N (500kg)
Cable Outer Diameter  : 15 mm
Spiral inner cable Diameter  : 8 mm

How To Measure For Replacement Steering Cable:

    Measure dimension D which is the conduit length on the existing cable .
    Length of Cable to be ordered : "D" Dimension +22 inch
    To order in foot length, divide length by 12 and round up to next whole foot
    Example: D=150 inch + 22 inch = 172 inch
    Divide by 12 (172/12= 14.33 ft) Round up to 15 ft.

How to measure for new Steering Cable Installation:

Once you have selected the Steering System, it is now required to measure the length of the required Steering Cable. Each boat has a specific requirement of Cable length which depends on the length of the boat and the routing of the cable.

The required Steering Cable length should be measured as below:

Measure the dimensions : A, B, and C in centimetres.

Ascertain whether the cable installation is :

    Through Engine Tilt Tube
    Transom Support
    Splashwell Mounting

Use the following method for calculating the Steering Cable Length :

(See Diagram 1)

1) For Installation through Engine Tilt Tube :

    Add dimensions A + B + C
    Add 30.5 cm to the above figure.
    Subtract 10cm of the above total for each 90 degree bend in the cable routing
    You have the required length of the Steering Cable in centimetres. If you wish to order in feet, divide the above calculated length by 30.5 and round the figure to next feet.

For Example:

If A = 100cm, B = 200cm, C= 60cm.

Assume there are two 90 degree bends in the routing.

The length of the required cable shall be : 100 + 200 + 60 = 360

Subtract 20cm on account of two 90 degree bends 360- 20 = 340

Add 30.5 on account of Tilt tube installation 340 + 30.5 = 370.5 cm

For cable length in feet : 370.5 / 30.5 = 12.14 [Round off = 13 feet]

--------------------------------------------------------
 
2) For Splashwell Mounting and Transom Support installation : (Diagram 2 & 3)

    Add dimensions A + B + C
    Add 30.5 cm to the above figure.
    You have the required length of the Steering Cable in centimetres. If you wish to order in feet, divide the above calculated length by 30.5 and round the figure to next feet.

For Example:

If A = 100cm, B = 200cm, C= 60cm.

Assume there are two 90 degree bends in the routing.

The length of the required cable shall be : 100 + 200 + 60 = 360

Subtract 20cm on account of two 90 degree bends 360- 20 = 340

Add 30.5 on account of Tilt tube installation 340 + 30.5 = 370.5 cm

For cable length in feet : 370.5 / 30.5 = 12.14 [Round off = 13 feet]

--------------------------------------------------------

2) For Splashwell Mounting and Transom Support installation : (see Diagram 2 & 3)

    Add dimensions A + B + C
    Subtract 10cm of the above total for each 90 degree bend in the cable routing

You have the required length of the Steering Cable in centimetres. If you wish to order in feet ,divide the above calculated length by 30.5 and round the figure to next feet

For Example:

If A = 100cm, B = 200cm, C= 60cm

Assume there are two 90 degree bends in the routing.

The length of the required cable shall be : 100 + 200 + 60 = 360

Subtract 20 cm on account of three 90 degree bends 360 - 20 = 340 cm

For cable length in feet : 340 / 30.5 = 11.14 [Round off = 12 feet]

Note :It is advised to consult a qualified technician while selecting, installing or servicing the Steering System on your boat.

Subscribe for Special Offers

Sign up successful!