Inter Prekote Undercoat Single Pack - White - 4 Litres

{{ getFromPrefix }} SMART VIP CARD PRICE

Mix 'N' Match Deal: Buy {{ selectedOption.mixnMatch.quantity }} + and save {{ selectedOption.mixnMatch.price }}% {{ selectedOption.mixnMatch.quantity }} x for {{ selectedOption.mixnMatch.description }}

Serves: {{selectedOption.serves}} ( per serve)

was save {{ selectedOption.saleSavingsPercent }}%

{{product.options[0].name}}

{{packitem.quantity}} x {{packitem.item.name}} {{packitem.options[0].name}}

- +

Stock Notification

Standard NZ $9.99 per order shipping deal, qualifies for FREE shipping for order totals over NZ $100.00

Store Availablity

{{b.name}} Low Stock In Stock Out of Stock
Select a variation to see branch availability
SKU #

Pre-Kote is a single pack undercoat, specially formulated for marine conditions and for use on all substrates under one-pack topcoats. It also offers superb opacity and long-life.

 

**SHIPPING PRICE IS FOR NORTH ISLAND SHIPPING ONLY, INCLUDING AUCKLAND** Auckland we recommend collection if possible.
SOUTH ISLAND SHIPPING: Please contact the Smart Crew for a shipping quote to your address.
SORRY, THIS ITEM CANNOT BE ORDERED ONLINE TO THE SOUTH ISLAND. The shipping price is for North Island delivery only.

 

Features:

  • Undercoat for one-part finishes with excellent opacity for easy colour changing
  • Long-lasting, easy to apply and rub down
  • Long over-coating times allow coat-on-coat application
  • Can be used in both fresh water and salt water environments


Specifications:

  • Products Practical Coverage: ~12.00 mt²/lt using applications tools such as brush or roller
  • Actual Coverage For This Sized Product: 48.00 mt²
  • Area: Above the Waterline
  • Finish/sheen: Low Sheen
  • Colour: White
  • Size: 4 Litres 
  • Substrates: Aluminium, GRP/FRP, Steel, Wood, Carbon Fibre, Zinc-Galvanised, Steel, Epoxy Composite
  • Application Tools: Brush, Roller - (For professional use only:) Conventional Spray, Airless Spray, Airmix
  • Thinners: International Retarder Thinners #9, YTA064 International Polyurethane Spraying Thinners #10


Preperation and Application Conditions:

  • Ensure you are in a safe working enviroment with proper ventillation and safety/protective gear on your persons
  • Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation
  • The film formation may be adversely affected by light rain, high humidity and/or condensation during application
  • In confined spaces provide adequate ventilation during application and drying
  • (IF IN GOOD CONDITION) - Abrade with 280­ / 320 grade (grit) paper to remove dust particles
  • (IF IN POOR CONDITION) - Remove all previous coatings and prime the substrate
  • Any following application methods will depend on what substrate Pre-Kote is applied to - Refer to the Product Data Sheet linked below for exact application methods


Practical Coverage:
Brush: 12.00 mt²/lt
Roller: 12.00 mt²/lt
Spray: 8.00 mt²/lt

Touch Dry - Time/Temp:
1 hrs - 35°C (95°F)
3 hrs - 23°C (73°F)
6 hrs - 15°C (59°F) 
15 hrs - 5°C (41°F)

Sandable - Time/Temp:
24 hrs - 35°C (95°F)
24 hrs - 23°C (73°F)
30 hrs - 15°C (59°F) 
48 hrs - 5°C (41°F)


The product data provided above is intended as a general overview to aid product selection and as such represents typical values.
For more specific application guidance and/or safety related information and procedures, please refer to the product datasheets provided:

Product data sheet:
https://s3-eu-west-1.amazonaws.com/akzonobel-live/documents/TDS/Pre-Kote_APengA4Y20170515.pdf?mtime=20170918120444

Safety data sheet:
https://s3-eu-west-1.amazonaws.com/akzonobel-live/documents/SDS/YUB000_E8_AUS_eng.pdf?mtime=20170914095534

Subscribe for Special Offers

Sign up successful!