Ados High Performance Ms Polymer Sealant - Black - 400Gm Cartridge

ADOS MS Sealant is a high performance, one-component neutral curing adhesive sealant based on MS Polymers. It has excellent primerless adhesion to all materials commonly used in the demanding building, construction, marine and engineering industries. It is ideal where silicone sealants are not suitable.

ADOS MS Sealant is formulated for durable bonding, sealing and waterproofing gaps in dilation joints. This innovative product cures quickly in ambient temperatures and retains excellent bond strength, elasticity and tear resistance over the years. It skins over in a short time resisting dust and dirt pickup and can be applied in thick layers without shrinking or bubbling.

ADOS MS Sealant will not stain and is compatible with commonly used paint systems. It will not crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation. It does not contain solvents, isocyanates and silicones.

Features & Benefits:

    Excellent adhesion strength – To a wide range of substrates commonly used in the building, construction and engineering industries
    Waterproofs, bonds and seals – Wide variety of application, one product does it all.
    Paintable – Cured product can be painted with most solvent and water based paints and varnishes
    Neutral cure – Contains no acids
    Extreme flexibility – Excellent mechanical properties over a wide temperature range for use in dilation joints
    Will not crack – No cracks and no signs of aging
    Interior and exterior use
    Low VOC, low odour – Contains no solvents or isocyanates
    UV resistant – Resistant to adverse weather conditions and UV exposure
    Durability – Excellent bond strength, tear resistance and elasticity is maintained over time, even years after application
    Non-slump – Suitable for vertical joints
    Extreme low shrinkage – Less than 1%, allows application in thick layers
    Non-bubbling – The surface stays smooth and intact
    Non-staining
    Primerless one-component product – Convenient and time saving on construction sites
    Cures fast – For increased productivity
    Skins over in a short time – To resist dirt and dust pickup
    Easy handling – Can be extruded from cartridges with a low force even in low temperatures
    Totally chemically neutral
    Good chemical resistance – To water, mild solvents, mineral oils, fat, low concentration anorganic acids and bases
    Easy clean up – Just wipe up any excess uncured product with a wet cloth
    Use on most substrates – PVC, concrete, brick, timber, glass, aluminium, iron, stainless, mild or galvanised steel, copper, brass, zinc, ceramic, plywood, masonry, cement plaster systems, many of the newly developed materials for construction, fiberglass, various plastics

Uses:

    Adheres to PVC, concrete, brick, timber, glass, aluminium, iron, stainless, mild or galvanised steel, copper, brass, ceramic, plywood, masonry, cement plaster systems, many of the newly developed materials for construction, fiberglass, various plastics.
    Suitable for sealing gaps in expansion joints in concrete, brick, mortar, plumbing and roofing.
    For joints in construction, on outer walls, in green houses. Especially suitable where dilation/expansion and stress occurs.
    For sealing window frames, doors, fibre-cement siding, vinyl siding, roofing and gutters.
    For joints that have to be painted.
    Where silicone sealants are not suitable.
    Suitable for adhering ceramic tiles and sanitary sealing in wet areas and timber.
    For fabrication and repair of truck trailers and containers, buses, recreational vehicles, train cars, light-rail vehicles, mobile homes, refrigerated trucks, metal construction, yacht and boat building.
    Ideal for exterior joint, gap and seam sealing on vehicle bodies, ventilation duct work and air conditioning.
    Capable of withstanding moderate expansion-contraction cycles.
    Interior and exterior use.

Application Method: Cartridge

**PRICE IS EACH PER CARTRIDGE, price is for one.